Basement Waterproofing

Basement Waterproofing

Leak Repairs and Remedial Waterproofing

Finding and fixing active leaks, failed tanking, blocked channels and burnt-out pumps in existing basement waterproofing systems.

Free Basement Waterproofing quote

No obligation. We only use your details to reply about this job.

Leak Repairs and Remedial Waterproofing — Basement Waterproofing

What's involved

Older systems fail for predictable reasons: tanking cracks as the building moves, membranes are punctured by fixings, drainage channels silt up with lime from the masonry, and sump pumps burn out. Remedial work starts by tracing the leak. That may mean lifting floor boards, opening inspection ports, flushing channels with a jet wash or running water tests outside. Fixes range from resin injection into a crack, through re-tanking a section of wall, to replacing a pump and adding an alarm. Where an old system keeps failing, the specialist may recommend overlaying it with a cavity drain membrane rather than patching again. Small repairs often take a day. If water is coming in now, move belongings off the floor, check the sump is running and send photos with your quote request so the team can bring the right kit.

How we handle it

  1. Send your details

    Use the quote form to tell us about the space, how it is used now, what you want it for and any water you have seen. Photos of walls, floor and any staining help the specialist judge the job before visiting.

  2. Site survey

    A local waterproofing specialist inspects the basement inside and out, takes moisture readings, checks drains and ground levels, and discusses the grade of protection you need for your planned use.

  3. Written design and quote

    You receive a written recommendation explaining the system, why it suits your building, how long it will take and a fixed all-in price. Nothing is booked until you are happy with it.

  4. Installation

    The team protects access routes, strips old finishes, installs the membrane, tanking, channels and sump as designed, and tests the drainage before any boards or screed go on top.

  5. Handover and servicing

    You get system drawings, product details and warranty paperwork, plus advice on fixings and annual sump servicing so the basement stays dry for the long term.

Price guide

Basement waterproofing is priced per square metre of wall and floor treated, plus fixed costs for drainage channels, sump chambers and pumps. The biggest swings come from the grade of protection needed, the condition of the walls and how hard it is to get materials in and out. A survey fixes the scope, then you get one all-in written price.

  • Typical small cellar to Grade 3: £8,000–£18,000. Around 20–30 m² floor area with membrane, sump and boarding ready for decoration.
  • Sump pump system: £1,800–£3,500. Chamber, twin pumps, high-level alarm, battery backup and discharge pipework to outside.
  • Cementitious tanking: £70–£130 per m². Stripping, preparation, fillets and multi-coat slurry; replastering on top priced separately.

Questions about leak repairs and remedial waterproofing

How much does basement waterproofing cost in the UK?

Most UK basement waterproofing jobs cost £90–£160 per square metre for a cavity drain membrane, or £70–£130 per square metre for tanking. A typical small cellar made fully habitable with a membrane, sump pump and boarding comes to around £8,000–£18,000. Larger basements, poor access and pumped drainage push costs up. A survey gives you a fixed figure.

How long does basement waterproofing take?

A typical cellar of 20 to 30 square metres takes about one to two weeks to waterproof, including stripping old finishes, fitting the membrane, cutting perimeter channels and installing a sump. Tanking needs extra drying time before plastering. A full conversion with insulation, electrics and decoration usually runs three to six weeks from start to finish.

Will waterproofing stop condensation in my basement?

Waterproofing stops water coming through the walls and floor, but it does not stop condensation on its own. Cold basement air holds moisture from people, laundry and cooking, so habitable basements also need insulation, heating and ventilation such as a mechanical extract fan or a positive input unit. Your specialist should consider all three when designing a Grade 3 space.

Get a free basement waterproofing quote

Tell us what you need and we'll come back with a clear price.

Request a quote