Plymouth · South West
Basement Waterproofing in Plymouth
Basement Waterproofing serves Plymouth and the wider the South West, matching each job with an insured specialist who designs to BS 8102.
Plymouth and the surrounding area
We cover all of Plymouth and the wider Plymouth area. That includes the PL6, PL5, PL9, PL7, PL4 and PL1 postcode districts. Nearby places we also cover include Sherford and Torpoint.
Working in Plymouth
Local stone, cob and lime-rendered buildings are common in parts of the South West, so materials need to suit older, breathable construction. Pre-war cellars in Plymouth may have timber joists bearing into damp walls, so the survey checks for rot before waterproofing begins. Coastal basements in Plymouth can face salty groundwater and efflorescence, so specialists strip salts thoroughly and favour membranes that tolerate them.
Where parking is tight in Plymouth, specialists may need a permit or bay suspension for a van and skip; we flag this at survey stage. Terraced streets in Plymouth often have no rear access, so membranes, sumps and spoil go through the house; floors and hallways are protected throughout.
Our services in Plymouth
Cementitious Tanking
Waterproof slurry or render applied directly to prepared walls and floors to form a continuous barrier against water and damp.
Cavity Drain Membrane Systems
Studded plastic membranes fixed to walls and floors that let water in behind them and channel it to a drain or sump, keeping the room dry.
Leak Repairs and Remedial Waterproofing
Finding and fixing active leaks, failed tanking, blocked channels and burnt-out pumps in existing basement waterproofing systems.
Cellar Conversion Waterproofing
Waterproofing designed as part of turning a cellar into a habitable room, coordinated with insulation, ventilation, electrics and Building Regulations.
Damp and Water Ingress Surveys
A specialist inspection to find where water is getting in, why, and which waterproofing grade and system suits your basement.
Sump Pump Installation and Servicing
Sump chambers, twin pumps, battery backup and high-level alarms that remove water collected by drained waterproofing systems.
Guide prices for Plymouth
- Annual sump service: from £150. Pump and alarm testing, chamber clean, battery check and channel flushing through inspection ports.
- Typical small cellar to Grade 3: £8,000–£18,000. Around 20–30 m² floor area with membrane, sump and boarding ready for decoration.
- Sump pump system: £1,800–£3,500. Chamber, twin pumps, high-level alarm, battery backup and discharge pipework to outside.
Prices are a guide. Your quote for Plymouth is a fixed price based on the details you give us. Full price guide.
Basement Waterproofing questions from Plymouth
How disruptive is cellar waterproofing in Plymouth?
The work is mostly confined to the cellar, but expect noise from breaking out floor channels and a sump, plus materials coming through the house. Teams in Plymouth protect floors and hallways and remove waste daily. Most households stay at home throughout.
What causes damp cellars in Plymouth homes?
Most damp cellars in Plymouth are older brick or stone structures with no damp-proof course, sitting in wet ground. Leaking drains, high garden levels and poor ventilation add to the problem. A survey identifies the causes so you only pay for the work that will actually fix it.
How soon can someone survey my basement in Plymouth?
Surveys in Plymouth can usually be arranged within a week or two, sooner if water is actively coming in. Send photos with your quote request so the specialist can prioritise urgent jobs and bring the right equipment on the first visit.
How much does basement waterproofing cost in Plymouth?
In Plymouth, most cellar waterproofing jobs are priced at £90–£160 per square metre for a cavity drain membrane, with sump systems from around £1,800. A small cellar made fully habitable typically costs £8,000–£18,000 depending on size and access. Request a quote and a specialist will survey and give you one fixed price.
How long does basement waterproofing take?
A typical cellar of 20 to 30 square metres takes about one to two weeks to waterproof, including stripping old finishes, fitting the membrane, cutting perimeter channels and installing a sump. Tanking needs extra drying time before plastering. A full conversion with insulation, electrics and decoration usually runs three to six weeks from start to finish.
Can I put screws or shelves into a waterproofed wall?
You can fix into a membrane system once it has been boarded or battened, because fixings go into the lining, not through the membrane. Tanked walls must not be drilled after waterproofing unless the hole is resealed with a compatible product. Plan shelving, sockets and radiators with your specialist so fixing points can be built in.
Helpful guides
BS 8102 Explained: Basement Waterproofing Types and Grades
BS 8102:2022 is the British Standard code of practice for protecting below-ground structures from groundwater. It sets three types of…
Read the guide →Cavity Drain Membrane vs Tanking: Which Is Better for a Basement?
A cavity drain membrane is usually the better choice for old UK cellars because it collects water and drains it away instead of trying to…
Read the guide →Get a free basement waterproofing quote in Plymouth
Tell us what you need and we'll come back with a clear price.
Request a quote