Basement Waterproofing
Cavity Drain Membrane Systems
Studded plastic membranes fixed to walls and floors that let water in behind them and channel it to a drain or sump, keeping the room dry.

What's involved
A cavity drain system is the most common way to make an older cellar habitable. Instead of trying to hold water back, a studded high-density polyethylene membrane is plugged to the walls and laid on the floor, creating an air gap. Any water that gets through the masonry runs down behind the membrane into a perimeter drainage channel set into the floor edge, then on to a sump pump or gravity outlet. Joints are sealed with butyl tape and the wall membrane is usually finished with dot-and-dab plasterboard or battens. Floors get a screed or floating boards on top. A typical 25 square metre cellar takes four to seven days. You will need to clear the space fully, and allow access for the team to cut a channel and run a discharge pipe outside. Inspection ports are left in so the channel can be flushed during annual servicing.
How we handle it
Send your details
Use the quote form to tell us about the space, how it is used now, what you want it for and any water you have seen. Photos of walls, floor and any staining help the specialist judge the job before visiting.
Site survey
A local waterproofing specialist inspects the basement inside and out, takes moisture readings, checks drains and ground levels, and discusses the grade of protection you need for your planned use.
Written design and quote
You receive a written recommendation explaining the system, why it suits your building, how long it will take and a fixed all-in price. Nothing is booked until you are happy with it.
Installation
The team protects access routes, strips old finishes, installs the membrane, tanking, channels and sump as designed, and tests the drainage before any boards or screed go on top.
Handover and servicing
You get system drawings, product details and warranty paperwork, plus advice on fixings and annual sump servicing so the basement stays dry for the long term.
Price guide
Basement waterproofing is priced per square metre of wall and floor treated, plus fixed costs for drainage channels, sump chambers and pumps. The biggest swings come from the grade of protection needed, the condition of the walls and how hard it is to get materials in and out. A survey fixes the scope, then you get one all-in written price.
- Cementitious tanking: £70–£130 per m². Stripping, preparation, fillets and multi-coat slurry; replastering on top priced separately.
- Cavity drain membrane (walls and floor): £90–£160 per m². Supplied and fitted including sealing and perimeter channel; boarding and screed are usually extra.
- Damp and water ingress survey: £150–£350. Site inspection, moisture readings and a written report with recommendations; often credited against the work.
Questions about cavity drain membrane systems
Is tanking or a cavity membrane better for a basement?
A cavity drain membrane is usually better for older cellars, because it manages water rather than trying to block it and copes with building movement. Tanking bonds directly to the wall, so any crack can let water through, and it is best where water pressure is low. Many specialists combine the two, and BS 8102 recommends considering combined protection for habitable spaces.
Does a cavity drain membrane need a sump pump?
A cavity drain membrane needs somewhere for the collected water to go, which is usually a sump pump. If the basement floor sits above a nearby drain or the ground falls away, gravity drainage to outside may be possible instead. Where a pump is used, twin pumps, a high-level alarm and battery backup are strongly advised to cover pump failure and power cuts.
Other services
Cementitious Tanking
Waterproof slurry or render applied directly to prepared walls and floors to form a continuous barrier against water and damp.
Sump Pump Installation and Servicing
Sump chambers, twin pumps, battery backup and high-level alarms that remove water collected by drained waterproofing systems.
Damp and Water Ingress Surveys
A specialist inspection to find where water is getting in, why, and which waterproofing grade and system suits your basement.
Cellar Conversion Waterproofing
Waterproofing designed as part of turning a cellar into a habitable room, coordinated with insulation, ventilation, electrics and Building Regulations.
Leak Repairs and Remedial Waterproofing
Finding and fixing active leaks, failed tanking, blocked channels and burnt-out pumps in existing basement waterproofing systems.
Cavity Drain Membrane Systems near you
Get a free basement waterproofing quote
Tell us what you need and we'll come back with a clear price.
Request a quote